1000S

AC Mains Section

Mains voltage input_______________ AC 100 to 240 Vac +/- 10% 50/60Hz

 

Dimension / Weight

Weigth_______________ 1.25Kg
External dimension______ 270mm (W) 98mm (D) 55mm (H)

 

Audio Section

S/N ratio__________ > 108dB/A Weight
Distorsion_________ < 0.7% (THD DIM SMPTE)
Inputs____________ Balanced to ground
Sensitivity_________ +4dBm
Input Inpedance____ 5KOhm Gain_____________ 31,5 dBm
Bandwith_________ 10Hz - 25KHz
Output___________ Referred to ground

 

Power Section

All values are guaranteed @ 100 to 240Vac 50/60 Hz mains input
Power continuous (Single Channel) (1KHz 1% THD)_______ 8 Ohm = 255W 4 Ohm = 470W
Power EIA (Single channel) (1KHz 1% THD)________ 8 Ohm = 277W 4 Ohm = 514W Bridged _ 8 Ohm = 994W Power continuous (Both Channels driven) (1KHz 1% THD)_______ 8 Ohm = 245W 4 Ohm = 455W (IHF A-202)
Power EIA (IHF A-202) (Both channel driven) (1KHz 1% THD)________ 8 Ohm = 253W 4 Ohm = 498W
Bridged EIA (IHF A-202)

 

Features

Clip limiter
Rms limiter vs Input Frequency
Thermal protection (over-temperature output power limiting)
Auxiliary output voltage +/- 13.5V regulated 200mA ( on inputs connector )
Optional cooling fan ready (Conn3)
Self-resettable Output low-impedance protection
Self-resettable Over current protection

600M

AC Mains Section

230V~ Mains voltage input____________ 220 to 240 V~ +/- 10% 50Hz

115V~ (Use supplied 115V Link connector)____________ 100 to 120 V~ +/- 10% 60Hz

 

Dimension / Weight

Weigth_______________ 1.1 Kg
External dimension (W x H x D)______ 98 x 55 x 270 mm

 

Audio Section

S/N ratio__________ > 108dB/A Weight
Distorsion_________ < 0.7% (THD DI M SMPTE)
Inputs____________ Balanced to ground
Sensitivity_________ +4dBm
Input Inpedance____ 5KOhm Gain_____________ 33,5 dBm
Bandwith_________ 10Hz - 25KHz
Output___________ Referred to ground

 

Power Section

Measured @ 230 V~ 50 Hz mains input
Power continuous (Single Channel) (1KHz 1% THD)_______ 8 Ohm = 350W 4 Ohm = 470W
Power continuous (Both Channels driven) (1KHz 1% THD)________ 8 Ohm = 245W 4 Ohm = 455W
Power peak (Single channel) (1KHz CEA-2006 @ 2% THD)________ 8 Ohm = 277W 4 Ohm = 514W
Power peak (Both Channels driven) (1KHz CEA-2006 @ 2% THD)________ 8 Ohm = 253W 4 Ohm = 498W
Bridged (1KHz CEA-2006 @ 2% THD)________ 8 Ohm = 994W

 

Features

Clip limiter
Rms limiter vs Input Frequency
Thermal protection (over-temperature output power limiting)
Auxiliary output voltage +/- 13.5V regulated 200mA ( on inputs connector )
Optional cooling fan ready (Conn3)
Self-resettable Output low-impedance protection
Self-resettable Over current protection